HAND TOOLS
(Contained in individual sets or the tool crib
in sufficient quantities to permit efficient instruction)
COMMON HAND TOOLS
Adjustable Wrenches - 6" and 12"
Allen Wrench Set - Standard (.050" - 3/8")
Allen Wrench Set - Metric (2mm - 7mm)
Anti-freeze Drain Pan
Battery Post Cleaner
Battery Terminal Pliers
Battery Terminal Puller
Brake Spoon
Chisels:
Cape 5/16"
Cold 3/8", 3/4"
Combination Wrenches:
Standard (1/4" - 1")
Metric (7mm - 19mm)
Crowfoot Wrench Set - Metric
Crowfoot Wrench Set - Standard
DMM (Digital Multimeter)
Drill Motors - 3/8" and 1/2" variable speed, reversible
Feeler Gauge (Blade Type):
.002" - .040"
.006mm - .070mm
Flare Nut (tubing) Wrenches:
Standard 3/8" - 3/4"
Metric 10mm - 17mm
Flashlight and batteries
Hack Saw and blades
Hammers:
16 oz. Ball Peen
Brass
Dead Blow Mallet
Plastic Tip
Sledge
Soft Faced
Rubber Mallet
Ignition Wrench Set - Standard and Metric
Impact Wrenches - 3/8" and 1/2"
Inspection Mirror
Jumper Wire Set (with various adapters)
Oil Drain/Storage Pan
Oil Filter Wrenches
Pickup Tool - magnetic and claw type
Pliers:
Combination
Hose Clamp
Locking Jaw
Needle Nose
Side Cutting
Slip Joint (Water Pump)
Snap Ring Plier Set - internal and external
Power Reciprocating Saw and blades
Punches:
Center
Brass Drift
Pin 1/8", 3/16", 1/4", 5/16"
Taper 3/8", 1/2", 5/8"
Screwdriver - Blade Type:
Stubby
6", 9", 12"
Offset
Screwdrivers - Phillips:
Stubby #1, #2
6" #1, #2
12" #3
Offset #2
Screwdrivers - Posidrive Set #1, #2, #3, #4
Screwdrivers -
Torx® Set:
T-8, T-10, T-15, T-20, T-25,
T-27, T-30, T-40, T-50, T-55
Torx® External Set:
E-4, E-5, E-6, E-8,
E-10, E-12, E-14, E16
Torx® Tamper Proof Set:
T8, T19, T15, T20, T27,
T30, T40, T45, T50, T55
Screw Extractor Set
Screw Starter:
Phillips
Standard
Socket Set - 1/4" Drive:
1/4" - 1/2" Standard Depth
1/4" - 1/2" Deep
6mm - 12mm Standard Depth
6mm - 12mm Deep
Flex/Universal Type - Standard and Metric
1/4" Universal Joint
3", 6" Extensions
Ratchet
Socket Set - 3/8" Drive:
5/16" - 3/4" Standard Depth (6 point)
3/8" - 3/4" Deep (6 point)
9mm - 19mm Standard Depth
9mm - 19mm Deep
3", 6", 12", 18" Extensions
Flexhead Ratchet
Impact Sockets - 3/8" - 3/4" Standard
Impact Sockets - 10mm - 19mm
Impact Driver
Ratchet
Speed Handle
Universal Joint
Socket Set - 1/2" Drive:
7/16" - 1 1/8" Standard Depth
7/16" - 1 1/8" Deep
10mm - 25mm Standard Depth
10mm - 25mm Deep
5", 10" Extensions
Flex Handle (Breaker Bar)
Impact Sockets Standard 7/16" - 1 1/8"
Impact Sockets 12mm - 32mm
Impact Driver
Ratchet
Torque Wrenches (Sound/Click and Impulse Type):
3/8" Drive lb. in. (30 - 250)
3/8" Drive lb. ft. (5 - 75)
1/2" Drive lb. ft. (50 - 250)
|
