PLASTICS AND ADHESIVES
For every task in Plastics and Adhesives, the following safety requirement must be
strictly enforced:
Comply with personal and environmental safety practices associated with clothing;
respiratory protection; eye protection; hand tools; power equipment; proper
ventilation; and the handling, storage, and disposal of chemicals/materials in
accordance with local, state, and federal safety and environmental regulations.
| IV. PLASTICS AND ADHESIVES |
| 1. |
Identify the types of plastics; determine repairability. |
HP-I |
| 2. |
Identify the types of plastics repair procedures; clean and prepare the surface of
plastic parts. |
HP-I |
| 3. |
Repair plastic parts by welding. |
HP-I |
| 4. |
Repair plastic parts with urethane or epoxy adhesives; use reinforcements if
necessary. |
HP-I |
| 5. |
Repair holes and cuts in rigid and flexible plastic parts using backing materials
and adhesives. |
HP-I |
| 6. |
Retexture plastic parts. |
HP-G |
| 7. |
Remove damaged areas from rigid exterior sheet-molded compound (SMC)
panels; repair with partial panel. |
HP-I |
| 8. |
Replace bonded sheet-molded compound (SMC) body panels; straighten or
align panel supports. |
HP-G |
| 9. |
Prepare repaired areas for refinishing. |
HP-I |
|
