HAND TOOLS
(Contained in individual sets or the tool crib
in sufficient quantities to permit efficient instruction)
Air Blow Gun (meeting OSHA requirements)
Allen (Wrench or Socket) Set - Standard (.050" - 3/8")
Allen (Wrench or Socket) Set - Metric (2mm - 7mm, 10mm, 12mm)
Battery Post Cleaner
Battery Terminal Pliers
Battery Terminal Puller
Chisels:
Cape 5/16"
Cold 3/8", 3/4"
Chisel Holder
Claw Type Pickup Tool
Combination Wrenches:
Standard (1/4" – 1 1/4")
Metric (7mm - 24mm)
Crowfoot Wrench Set - Metric
Crowfoot Wrench Set - Standard
Ear Protection
Feeler Gauge (Blade Type):
.002" - .040"
.006mm - .070mm
Files:
Coarse 6" and 12"
Fine 6" and 12"
Half Round 12"
Round 6" and 12"
Flare Nut (tubing) Wrenches:
3/8" - 3/4"
10mm - 17mm
Flashlight
Fuse Puller
Fused Jumper Wire Set (with various adapters)
Hack Saw
Hammers:
16 oz. Ball Peen
Brass
Dead Blow Plastic Mallet
Plastic Tip
Rubber Mallet
Inspection Mirror
Magnetic Pickup Tool
Pliers:
Combination 6"
Hose Clamp
Locking Jaw
Needle Nose 6"
Side Cutting
Slip Joint (Water Pump)
Pry Bars:
Rolling Head
Straight
Punches:
Center
Brass Drift
Pin 1/8", 3/16", 1/4", 5/16 "
Taper 3/8", 1/2", 5/8"
Safety Glasses (meeting OSHA requirements)
Scraper:
Carbon 1"
Gasket 1"
Screwdriver - Blade Type:
Stubby
6", 9", 12"
Offset
Screwdriver - Phillips:
Stubby #1, #2
6" #1, #2
12" #3
Offset #2
Screwdriver - Impact Driver Set
Screw Starter:
Phillips
Standard
Socket Set - 1/4" Drive:
1/4" - 1/2" Standard Depth
1/4" - 1/2" Deep
6mm - 12mm Standard Depth
6mm - 12mm Deep
Flex/Universal Type
3", 6" Extensions
Ratchet
Socket Set - 3/8" Drive:
5/16" - 3/4" Standard Depth (6 point)
3/8" - 3/4" Deep (6 point)
10mm - 19mm Standard Depth
10mm - 19mm Deep
3", 5", 10" Extensions
Flexhead Ratchet
Ratchet
Spark Plug Sockets 5/8", 13/16"
Speed Handle
Universal Joint
Flexible Socket Set 3/8" - 3/4"
Flexible Socket Set 10mm - 19mm
Socket Set - 1/2" Drive:
7/16" - 1 1/8" Standard Depth
7/16" - 1 1/8" Deep
10mm - 24mm Standard Depth
10mm - 24mm Deep
3", 6", 12" Extensions
Flex Handle (Breaker Bar)
Ratchet
Spark Plug Feeler Gauge (Gap Tool)
Tape Measure – Standard and Metric
Test Light (12V)
Tire Pressure Gauge
Torque Wrench:
3/8" Drive (10 - 250 lb. in.)
3/8" Drive (5 - 75 lb. ft.)
1/2" Drive (50 - 250 lb. ft.)
Torxâ Set (screwdrivers and/or sockets):
T-8 to T-60
Wire Brush
|
